1 description typical applications ordering information technical data single pole, miniaturised aircraft simulator switch with extremely fast magnetic trip time. blade, screw and wire wrap terminals. aircraft style threadneck and push/pull button with white trip indicator ring. current rating marked on the push button according to customers request by adhesive labels or marking inserts. us patent number: us 7,038,562 b1 us patent number: us 6,490,141 b2 (moulded threadneck) simulators. 9510-... type no. 9510 switch with magnetic instantaneous trip for flight simulators mounting method and style g threadneck mounting with standard push button threadneck design 1 m12x1x6.3 2 7/16-32unx6.3 number of poles 1 single pole accessories for threadneck 2 hex nut m12x1, aluminium, serrated lock washer ?12.1/?17.2, fitted 3 hex nut 7/16-32un (aluminium), serrated lock washer 11.3/14.9, fitted terminal configuration j screw terminals with inch thread 1 6-32unc-2b, silver plated bent 45 inwards 3 6-32unc-2b, silver plated, with socket, bent 45 inwards p blade terminals 1 a6.3x0.8 din 46244, silver plated w wire wrap terminal 4 pin size 1.2x1.2 en 60352-1, gold plated, with socket rated voltage f0 dc 24 v f1 dc 28 v accessories (terminal screws) b phillips screw 6-32unc-2ax4.8 fitted (ms 51957-25) z without accessories accessories (terminal washers) 0 without accessories 2 3.6 split washer fitted (ms 35338-136) internal circuit r2 with logic diode colour of the push button s black a green, for marking insert b black, for marking insert 0 without marking 1 hot-stamped marking, can be read when locating pin is above 9 without marking insert current ratings 0.5...150 a 9510 - g 2 1 3 - j 1 f1 - b 0 r2 s 1 - 5 a ordering example typical life 10,000 operations at rated voltage temperature range -30...+60 c (-22...+140 f) insulation resistance > 100 m (dc 500 v) degree of protection operating area ip40 (iec 60529) terminal area ip00 vibration (sinusoidal) 3 g (57-500 hz), 0.23 mm (10-57 hz) to din iec 60068-2-6, test fc 10 cycles/frequency axis shock 5 g (11 ms), to din iec 60068-2-27, test ea humidity 240 hours at 95 % rh, 40 c to din iec 60068-2-3, test ca mass 23 g without hardware 26 g with hardware voltage rating (other voltage ratings upon request) dc 24 v dc 28 v trip current < 170 ma < 200 ma trip time < 25 ms < 25 ms min. switching voltage at +23 c/+73.4 f at +60 c/+140 f dc 22 v dc 24 v dc 25 v dc 28 v internal resistance approx. 153 approx. 153 simulator switch, magnetic operation 9510-... www.e-t-a.de 1646 1
2 15 9.5 0.2 45 2 tightening torque max. 3.5 nm m12x1 or 7/16-32un-2a thd 18.5 off i line max. 2 1.5 2.5 13 on 42.7 terminal screw 6-32unc-2a x 4.8/.189 (ms 51957-25) with lock washer (ms 35338-136) plug-in terminals tightening torque: max. 0.8 nm factory mounted max. 0.4 nm mounted by customer 47.5 ?10 black or green white hex nut lock washer ?8.4 3.5 8 mounting holes ?3.2 +0.15 thickness 1.5 - 3 mm .059 - .118 in. sw14 (m12x1 ) sw12.7(7/16-32) 9.5 locating pin current rating in a 14.2 19.5 6.35 (m12x1) (7/16-32) ?12.5 +0.2 ?11.5 +0.2 .250 1.87 .059 .098 ma x .079 .512 .728 1.68 .591 .315 .138 .331 .394 .374 .559 .768 .374 .008 .126 +.006 (m12x1) (7/16-32) .492 +.008 .453 +.008 9510-g?-j1..-b2.... max. 2 . ma x .079 15 45 .591 8 .315 .248 17 9.5 blade terminal din 46244-a6.3-0.8 (qc .250) plug-in terminals .374 .669 1 6.3 .268 6.8 1.2 12.7 .614 wire wrap pin 1.2 x 1.2 /.047 x .047 en 60352-1 plug-in/pull-out terminal module (max. 10 times) 15.6 3.6 .142 .500 .047 terminal screw 6-32unc-2a x 4.8/.189 (ms 51957-25) with lock washer (ms 35338-136) plug-in/pull-out terminal module (max. 10 times) tightening torque max. 1 nm 10 .394 10 .394 this is a metric design and millimeter dimensions take precedence ( mm ) inch simulator switch, magnetic operation 9510-... www.e-t-a.de 1646 1
3 splash cover/hex nut assembly with o ring (ip66 and ip67) (approved to vg 95345, part 23) x 200 801 03 matt black finish nut m12x1x1.8, black cover x 200 801 08 nickel plated nut m12x1x1.8, transparent cover x 200 801 09 matt black finish nut 7/16-32x1x1.8, black cover x 200 801 10 matt black finish nut 7/16-32x1x1.8, transparent cover m12x1 or .071 7/16-32 1.8 actuator extension (black) to be fitted on the push butto n (approved to vg 95345, t23) x 200 803 01 ?20 17 ?.787 .669 identification collar to be snapped on the push button y 307 004 01 black y 307 004 02 white y 307 004 03 red y 307 004 04 green y 307 004 05 blue 6.4 ?6.85 ?12.35 ?14 .270 .551 .486 .252 0.65 .026 lock out ring to block the push button in off position y 307 005 01 red y 307 005 02 black 0.8 .031 ?10.9 ?14.6 .575 .429 7.7 .303 x 200 801 12 with blackened nut and transparent cover accessories this is a metric design and millimeter dimensions take precedence ( mm ) inch label (black) for push/pull button (s0) part number rated current (a) y 307 082 01 0.5 y 307 082 02 1/2 y 307 082 03 1 y 307 082 04 1.5 y 307 082 05 1 1/2 y 307 082 06 2 y 307 082 07 3 y 307 082 08 5 y 307 082 09 7.5 y 307 082 10 7 1/2 y 307 082 11 10 y 307 082 12 15 y 307 082 13 20 y 307 082 14 25 y 307 082 15 30 y 307 082 16 35 y 307 082 17 6 y 307 082 18 40 y 307 082 19 50 y 307 082 20 60 y 307 082 21 70 y 307 082 22 75 y 307 082 23 80 y 307 082 24 90 y 307 082 25 100 y 307 082 26 120 y 307 082 27 125 y 307 082 28 150 y 307 082 29 2.5 y 307 082 30 2 1/2 y 307 082 31 3 1/2 y 307 082 32 r y 307 082 33 5.5 y 307 082 34 17 y 307 082 35 4 plug-in screw terminal, bent at 45 inwards (2 pcs needed per unit) y 307 187 02 terminal silver plated y 304 508 02 phillips screw 6-32 unc-2ax4.8 (ms 51957-25) y 304 509 01 split washer (ms 35338-136) plug-in blade terminal (2 pcs needed per unit) y 307 202 02 p10 terminal silver plated plug-in/pull-out screw terminals with socket, bent at 45 inwards x 222 173 11 terminals silver plated plug-in/pull-out wire wrap terminals with socket x 222 174 12 terminals gold plated simulator switch, magnetic operation 9510-... www.e-t-a.de 1646 1 simulator switch, magnetic operation 9510-...
4 hex nut m12x1 y 300 116 04 hex nut 7/16-32 y 304 506 03 lock washer ?12 / ?15 y 300 118 03 serrated lock washer ?12.1 / ?17.2 y 302 911 01 toothed washer ?11.3 / ?14.9 (ms 35333-141) y 304 507 01 front plate with mounting thread 6-32unc-2b for threadneck 7/16-32un y 301 516 21 threaded sleeve y 307 281 04 extracting tool of marking insert y 307 301 01 accessories all dimensions without tolerances are for reference only. in the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. errors and omissions excepted. marking inserts (push button configuration a or b) hot stamped black green current rating (a) y 307 280 01 y 307 280 02 without x 222 175 01 x 222 176 01 0.5 x 222 175 02 x 222 176 02 1/2 x 222 175 03 x 222 176 03 1 x 222 175 04 x 222 176 04 1.5 x 222 175 05 x 222 176 05 1 1/2 x 222 175 06 x 222 176 06 2 x 222 175 07 x 222 176 07 3 x 222 175 08 x 222 176 08 5 x 222 175 09 x 222 176 09 7.5 x 222 175 10 x 222 176 10 7 1/2 x 222 175 11 x 222 176 11 10 x 222 175 12 x 222 176 12 15 x 222 175 13 x 222 176 13 20 x 222 175 14 x 222 176 14 25 x 222 175 15 x 222 176 15 30 x 222 175 16 x 222 176 16 35 x 222 175 17 x 222 176 17 6 x 222 175 18 x 222 176 18 40 x 222 175 19 x 222 176 19 50 x 222 175 20 x 222 176 20 60 x 222 175 21 x 222 176 21 70 x 222 175 22 x 222 176 22 75 x 222 175 23 x 222 176 23 80 x 222 175 24 x 222 176 24 90 x 222 175 25 x 222 176 25 100 x 222 175 26 x 222 176 26 120 x 222 175 27 x 222 176 27 125 x 222 175 28 x 222 176 28 150 x 222 175 29 x 222 176 29 2.5 x 222 175 30 x 222 176 30 2 1/2 x 222 175 31 x 222 176 31 7 x 222 175 32 x 222 176 32 4 x 222 175 33 x 222 176 33 3.5 x 222 175 34 x 222 176 34 3 1/2 x 222 175 35 x 222 176 35 1/4 x 222 175 36 x 222 176 36 3/4 x 222 175 37 x 222 176 37 8 x 222 175 38 x 222 176 38 14 x 222 175 39 x 222 176 39 45 x 222 175 40 x 222 176 40 r x 222 175 41 x 222 176 41 0.75 x 222 175 42 x 222 176 42 24 simulator switch, magnetic operation 9510-... www.e-t-a.de 1646 1
|
